Archives

Wednesday, June 9, 2010

BSS Audio® introduces cost-effective Break-In Box to Soundweb™ London family

BSS Audio® today added a cost-effective break-in box to its acclaimed Soundweb™ London family of digital signal processors. The new BLU-BIB input expander compliments the eight other members of the Soundweb London™ family and represents an inexpensive solution to increasing the number of inputs in a Harman HiQnet™ networked system.


The BLU-BIB features eight analogue audio inputs on standard terminal block connectors and the 256-channel, low latency, fault tolerant digital audio bus, also found on the BLU-800, BLU-320, BLU-160, BLU-120, BLU-100 and BLU-BOB devices. In addition to providing a backbone for the transportation of multiple channels, this bus also facilitates the creation of large, fault-tolerant, centralized matrices containing multiple devices. The digital audio bus uses standard, inexpensive Cat 5e or Cat 6 cable, which enables a distance of 100 meters between devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fibre.

Simple front panel controls are provided on the BLU-BIB to configure Phantom Power per channel and input gain per channel. Signal present, clip, Phantom Power, applied input gain and power status are clearly displayed by front panel LED indicators for use with configuration, monitoring and troubleshooting.

The BLU-BIB features a front panel lockout mode for tamper-free operation and a ‘stealth’ mode for inconspicuous operation in dimly lit environments, where flickering LEDs would be distracting.

A series of DIP switches on the rear of the BLU-BIB device allow the eight input channels to be placed onto eight consecutive channels of the digital audio bus. The BLU-BIB devices are powered by an external 12VDC power supply which is included with the device.

Rob Urry, president of Harman Music Group stated, “Following the introduction of the hugely popular BLU-BOB output expander, the BLU-BIB is a natural addition to the Soundweb London family. Whether a system designer is looking to deploy microphone preamplifiers without fans, create digital snakes, augment the BLU-100 or cost-reduce larger systems, the BLU-BIB represents an important addition to the already highly-scalable Soundweb London family.”

A BSS Audio 1U Rack Mount Kit is available to accommodate up to two BLU-BIB or BLU-BOB1 devices.

The BSS Audio BLU-BIB will ship in the UK in July 2010.

For more information please contact UK/ROI distributor Sound Technology Ltd on 01462 480000 or visit www.soundtech.co.uk/bss


No comments:

Post a Comment