Canon PowerShot SX 110 IS

One of the SX110 IS's biggest lures is its compact size for a megazoom. It measures 4.4 inches wide by 2.8 inches high by 1.8 inches deep and weighs 10.4 ounces and will fit comfortably into a jacket pocket or uncomfortably in a jeans pocket. The optically stabilized 10x f2.8-4.3 36-360mm zoom lens is responsible for most of that weight.

Though slightly smaller than the SX100 IS, the SX110 IS remains large enough that it should be easy to hold securely, but its grip is shallow and the body is slippery. Encased in plastic, the SX110 IS nevertheless feels quite solid and sturdy. A door on the bottom covers an SDHC card slot and battery compartment. Unlike most AA powered megazooms that use four batteries, the SX110 IS is powered by only two, and battery life feels relatively short.

You'll want to pick up some rechargeable NiMH batteries for sure. With the screen now 0.5 inch larger than the SX100's at 3 inches, the PictBridge, face detection, and display and menu buttons once below the LCD have been shuffled a bit.

Face detection, display, and menu buttons join the dedicated exposure compensation button above and below the navigational scroll wheel instead of below the LCD. This actually works better since it puts everything under your thumb.

The wheel surrounds a Func button and has top, bottom, left, and right pressure points for ISO sensitivity, focus (manual and macro), flash, and drive mode unfortunately, it retains its all too easy to change settings responsiveness. The PictBridge button is now relegated to the far left corner above the screen, while a playback button sits between the right side of the LCD and the slight indent of a thumb rest.

Since the release of the SX100 IS, many megazoom cameras have expanded to a full complement of manual and semi manual exposure modes, flash and exposure compensation, and metering modes, so it's no surprise that the SX110 IS is still fully stocked in that department. There's also the de rigueur handful of scene modes, plus a decent face detection mode that lets you scroll through found faces to select one. It still takes longer to use than simply picking a face and focusing on it.